HP 4500G PWR 24-Port, Руководство по настройке

Страница: 750 / 1968

1-2
To do… Use the command… Remarks
Create a behavior and enter
behavior view
traffic behavior behavior-name
Required
Configure a traffic
redirecting action
redirect next-hop
{
ipv4-add
[
ipv4-add
]
| ipv6-add
[
interface-type
interface-number
] [
ipv6-add
[
interface-type interface-number
] ] }
Optional
Exit behavior view
quit
—
Create a policy and enter
policy view
qos policy policy-name
—
Associate the class with the
traffic behavior in the QoS
policy
classifier tcl-name behavior
behavior-name
—
To implement policy routing successfully, ensure that the next hop address specified in the redirect
action exist and the outgoing interface is not a tunnel interface. If you fail to do that, the matching traffic
will be dropped.
Applying the QoS Policy
When configuring policy routing, you can apply a QoS policy to different occasions:
z
Applied globally, the policy takes effect on the traffic sent or received on all ports.
z
Applied to an interface, the policy takes effect on the traffic sent or received on the interface.
z
Applied to a VLAN, the policy takes effect on the traffic sent or received on all ports in the VLAN.
A QoS policy used for policy routing applies to only traffic received on all ports/an interface/all ports in a
VLAN.
Follow these steps to apply the QoS policy globally:
To do… Use the command… Remarks
Enter system view
system-view
—
Apply the QoS policy globally
qos apply policy policy-name
global inbound
Required
Follow these steps to apply the QoS policy to an interface: