HP 4500G PWR 24-Port, Руководство по настройке

Страница: 594 / 1968

1-34
With quick eBGP connection reestablishment enabled, the router, when the link to a directly connected
eBGP peer is down, will reestablish a session to the eBGP peer immediately.
Follow these steps to enable quick eBGP session reestablishment:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enable quick eBGP session
reestablishment
ebgp-interface-sensitive
Optional
Not enabled by default
Enabling MD5 Authentication for TCP Connections
BGP employs TCP as the transport protocol. To enhance security, you can configure BGP to perform
MD5 authentication when establishing a TCP connection. The two parties must have the same
password configured to establish TCP connections. BGP MD5 authentication is not for BGP packets,
but for TCP connections. If the authentication fails, no TCP connection can be established.
Follow these steps to enable MD5 authentication for TCP connections:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enable MD5 authentication when
establishing a TCP connection to the
peer/peer group
peer
{
group-name |
ip-address
}
password
{
cipher
|
simple
}
password
Optional
Not enabled by default
Configuring BGP Load Balancing
If multiple paths to a destination exist, you can configure load balancing over such paths to improve link
utilization.
Follow these steps to configure BGP load balancing:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Configure the maximum number of
BGP routes for load balancing
balance number
Optional
Load balancing is not
enabled by default.