1-11
startup saved-configuration new-config.cfg
boot-loader file soft-version2.bin main
reboot
2) Configuration on Device
# Log in to the FTP server (note that the prompt may vary with servers.)
<Device> ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download file
auto-update.txt
on the FTP server.
[ftp] ascii
[ftp] get auto-update.txt
# Download file
new-config.cfg
on the FTP server.
[ftp]get new-config.cfg
# Download file
soft-version2.bin
on the FTP server.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye
<Device>
# Modify the extension of file
auto-update.txt
as
.bat
.
<Device> rename auto-update.txt auto-update.bat
To ensure correctness of the file, you can use the
more
command to view the content of the file.
# Execute the scheduled automatic execution function to enable the device to be automatically
upgraded at 3 am.
<Device> schedule job at 03:00 view system execute auto-update.bat
Info: Command execute auto-update.bat in system view will be executed at 03:00 12/11/2007(in
12 hours and 0 minutes).
Remote Scheduled Automatic Upgrade Configuration Example (Centralized IRF
Device)
Network requirement
z
As shown in
Figure 1-3
, the current software version is
soft-version1
for the IRF system. Upgrade
the software version of the IRF system to
soft-version2
and configuration file to
new-config
.
z
The newest application
soft-version2.bin
and the newest configuration file
new-config.cfg
are
both saved under the TFTP server.
z
The IP address of the IRF system is 1.1.1.1/24, the IP address of the TFTP server is 2.2.2.2/24,
and the TFTP server is reachable.
Содержание 4500G PWR 24-Port
