![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757496.webp)
14-29
18) Check the needle bearing (outer race) in the gear case for
damage before removing it. Replace the needle bearing
(outer race) if necessary.
19) Attach the special tools to the needle bearing (outer race)
and place a shop towel or equivalent material under the
needle bearing (outer race) as shown.
TOOLS:
Driver handle, 15 x 280 mm
07949-3710001
Bearing driver attachment, 37 mm
07ZMD-MBW0200
Pilot, 35 mm
07746-0040800
20) Remove the needle bearing (outer race) from the gear case
using the special tools.
• Remove the needle bearing (outer race) with care not to
damage the gear case.
• Replace the needle bearing (outer race) and the roller as
a set on assembly.
NOTICE
b. INSPECTION
• VERTICAL SHAFT O.D.
[1]
DRIVER HANDLE,
15 x 280 mm
07949-3710001
[2]
BEARING DRIVER
ATTACHMENT,
37 mm
07ZMD-MBW0200
[5]
PILOT, 35 mm
07746-0040800
[6]
NEEDLE BEARING
(OUTER RACE)
[4]
SHOP TOWEL
[3]
GEAR CASE
[1]
AT NEEDLE
BEARING
STANDARD
SERVICE LIMIT
At needle
28.556 – 28.575 mm
28.545 mm
bearing
(1.1242 – 1.1250 in)
(1.1238 in)