15-37
4) Remove the four hex. bolts and remove the power tilt
motor assembly from the pump assembly.
Drain the Automatic Transmission Fluid (ATF) from the
pump assembly.
[3]
PUMP ASSEMBLY
[2] POWER TILT
MOTOR
ASSEMBLY
[1] HEX. BOLT (4)
5) Remove the O-ring from the power tilt motor assembly.
Replace the O-ring with a new one on assembly.
[2] POWER TILT
MOTOR
ASSEMBLY
[1] O-RING
6) Remove the drive joint and the filter B from the pump
assembly.
Check the mesh of the filter B for blockage and tear. If it is
torn, replace the filter B with a new one. If it is clogged with
dust and dirt, blow the mesh with air to remove the
blockage. Take care not to damage the mesh.
Drain the residual Automatic Transmission Fluid (ATF) from
the pump assembly.
[3]
PUMP
ASSEMBLY
[2] FILTER B
[1] DRIVE JOINT
7) Remove the socket bolt A and Bs, and remove the pump
assembly from the cylinder comp.
Remove the five O-rings and orifice collar from the cylinder
comp.
Replace the O-rings with the new ones on assembly.
[4]
ORIFICE COLLAR
[3] O-RING (5)
[2] PUMP ASSEMBLY
[1]
SOCKET
BOLT B (2)
[5] SOCKET BOLT A