![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757538.webp)
14-71
18) Check the needle bearing (outer race) for damage before
removal. Replace if necessary.
19) Position the special tools on the needle bearing (outer race)
and the shop towel under the needle bearing (outer race) as
shown.
TOOLS:
Driver handle, 15 x 280 mm
07949-3710001
Bearing driver attachment, 37 mm
07ZMD-MBW0200
Pilot, 35 mm
07746-0040800
20) Remove the needle bearing (outer race) from the gear case
using the special tools.
• Remove the needle bearing (outer race) with care not to
damage the gear case.
• Replace the needle bearing (outer race) and the roller as
a set on assembly.
NOTICE
[1]
DRIVER HANDLE,
15 x 280 mm
07949-3710001
[2]
BEARING DRIVER
ATTACHMENT,
37 mm
07ZMD-MBW0200
[5]
PILOT, 35 mm
07746-0040800
[6]
NEEDLE BEARING
(OUTER RACE)
[4]
SHOP TOWEL
[3]
GEAR CASE
b. INSPECTION
• VERTICAL SHAFT O.D.
STANDARD
SERVICE LIMIT
At needle
28.556 – 28.575 mm
28.545 mm
bearing
(1.1242 – 1.1250 in)
(1.1238 in)
[1]
AT NEEDLE
BEARING