![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757148.webp)
4-29
UNDER COVER FRONT BRACKET:
1) Install the bracket cap.
2) Apply marine grease to the front lock shaft and the outer
surface of the cover lock bushing.
3) Apply marine grease to the outer surface of the cover lock
hook spring. Install the cover lock hook spring aligning its
hook with the hole in the front lock.
4) Set the front lock in the position shown. Install the front
lock on the under cover front bracket at an inclined angle.
5) Install the cover lock hook spring on the under cover front
bracket aligning its hook with the hole in the under cover
front bracket.
6) Apply marine grease to the outer surface of a cover lock
bushing A and install it on the under cover front bracket.
7) Install the 8 mm washer and the 6 mm E-ring on the front
lock.
8) Apply marine grease to the outer surface of the cover open
shaft, lock lever return spring, 8 mm washer and the cover
lock bushing B. Install the lock lever return spring, 8 mm
washer, and the cover lock bushing B on the cover open
shaft.
Hold the lock lever return spring compressed with the
cover lock bushing B.
9) Install the cover open shaft at an inclined angle in the under
cover front bracket.
10) Install the cover lock bushing B in the under cover front
bracket.
11) Install the 6 mm E-ring on the cover open shaft.
[1] COVER LOCK
BUSHING A
[8] COVER LOCK
BUSHING
[2] 6 mm E-RING
[3]
8 mm WASHER
[6]
FRONT
LOCK
[6]
FRONT
LOCK
[7] HOLE
[7]
HOLE
[6] FRONT LOCK
[5]
COVER
LOCK
HOOK
SPRING
[9]
BRACKET CAP
[5] COVER LOCK
BUSHING B
[1]
UNDER
COVER
FRONT
BRACKET
[10] UNDER COVER
FRONT BRACKET
[4]
8 mm WASHER
[3]
LOCK
LEVER
RETURN
SPRING
[6]
COVER
OPEN
SHAFT
[4]
(MARINE
GREASE)
[4] (MARINE
GREASE)
[2] (MARINE
GREASE)
[2] (MARINE GREASE)