![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757658.webp)
18-4
[2]
GEAR SHAFT
[4]
SNAP RING
[3]
WOOD BLOCK
[5]
GEAR SHAFT
STOPPER
[1]
OVERRUNNING
CLUTCH
[1]
GASKET
[2]
CLUTCH FORK
[1] PIPE
[I.D.: approx. 11mm (0.4 in),
O.D.: approx. 15 mm (0.6 in),
LENGTH: approx. 22 mm (0.8 in)]
9) Remove the gasket.
10) Remove the overrunning clutch.
11) Remove the clutch fork.
• OVERRUNNING CLUTCH DISASSEMBLY
1) Secure the gear shaft by placing a wood block under the
gear shaft assembly.
Secure the gear shaft assembly with care not to contact the
internal gear.
2) Prepare a pipe of the following dimensions.
• I.D.: approx. 11 mm (0.4 in), O.D.: approx. 15 mm (0.6 in),
LENGTH: approx. 20 mm (0.8 in)
3) Set the pipe on the gear shaft stopper and drop the gear
shaft stopper by tapping on the pipe.
4) Remove the snap ring using a screwdriver or equivalent
tool.
NOTICE