14-15
13) Apply grease to the inner wall of the water pump liner.
Install the pump impeller in the water pump liner with the
woodruff key installation groove facing up and the pump
impeller fins in the direction shown.
Be sure to align the hole in the pump liner with the hole in
the pump impeller.
14) Install the water pump liner in the impeller housing by
aligning the two projections on the pump liner with the two
grooves inside the impeller housing.
Be sure that the part “A” of the water pump liner is in
alignment with the part “B” of the impeller housing, too.
15) Apply grease to the circumference of the new water pump
O-ring and install it on the impeller housing.
16) Install the rubber setting plate, gear case grommet, two
dowel pins, new impeller gasket and the impeller cover.
[4]
WATER PUMP LINER
[2] WOODRUFF KEY
INSTALLATION GROOVE
[2] WOODRUFF KEY
INSTALLATION
GROOVE
[3]
PUMP
IMPELLER
[6]
WATER PUMP
LINER
[4]
RUBBER SETTING
PLATE
[3]
GEAR CASE
GROMMET
[5]
6 x 10 mm
DOWEL PIN (2)
[1]
IMPELLER
GASKET
[2]
IMPELLER
COVER
[5]
IMPELLER
HOUSING
[2]
PROJECTIONS
[3] CONCAVES
[1]
“A” POINT
[4]
“B” POINT
[1]
(Apply grease
to the inside.)