8-11
b. INSPECTION
• FLUSH VALVE
Check the flush valve gasket for deterioration and cracks, and
replace the flush valve if necessary.
[3]
MOUNT CASE
[2]
7 x 200 mm TUBE
[7]
FLUSH VALVE
COVER
[6]
16 mm O-RING
[4]
FLUSH VALVE
SPRING
[5]
FLUSH VALVE
6 x 16
[11]
FLUSH PLUG CAP
[10]
WATER HOSE
JOINT A
[9]
WATER SEAL
[12]
8 x 300 mm TUBE
[8]
13 mm TUBE CLIP B1 (2)
[2]
FLUSH VALVE COVER SIDE
[1]
FLUSH VALVE
GASKET
[1]
TUBE CLAMP D10.5 (2)
1) Install a new 16 mm O-ring on the flush valve cover.
2) Install the flush valve spring and the flush valve on the flush valve cover. Note the installation direction of the flush
valve.
3) Tighten the flush valve cover with the 6 x 16 mm flange bolt securely.
4) Install the tube clip B12.5s, flush plug cap, water hose joint A and the water seal on the 8 x 300 mm tube. Connect
the 8 x 300 mm tube to the flush valve cover and clamp the tube with the tube clip B12.5s.
5) Connect the 7 x 200 mm tube to the mount case.
6) Install the following parts.
– L./R. engine under covers (P. 4-14)
– Engine cover (P. 4-2)
c. ASSEMBLY
Check each tube for deterioration and cracks before assembly.
Replace the tubes if necessary.
NOTICE