15-15
4) Open the two wire bands that secure the speed sensor tube
A and B and disconnect the speed sensor tube A and B
from the joint A.
Replace the wire bands with the new ones on assembly.
Check the speed sensor tube A for deterioration and cracks.
Replace if necessary.
[3] JOINT A
[4]
WIRE
BAND (2)
[2] SPEED SENSOR
TUBE B
[1] SPEED SENSOR
TUBE A
5) Remove the motor wire bushing from the L. stern bracket.
[1]
L. STERN
BRACKET
[2]
MOTOR WIRE
BUSHING
6) Remove the two 6 x 25 mm hex. bolts and the two 6 mm
washers, and remove the anode metal.
Check the anode metal for corrosion. If it is corroded
excessively, replace with a new one.
[1] ANODE METAL
[2]
6 mm
WASHER (2)
[3] 6 x 25 mm
HEX. BOLT (2)