4-33
10) Adjust the length between the other end of the cable outer
and the end of the nut of the cover lock cable A so that it is
13 mm (0.5 in) as shown.
11) Holding the nut in the position described in step 10,
position the inner cable end of the cover lock cable A on the
side lock and position the cable A nut on the L. side cover
bracket.
Tighten the washer side lock nut securely.
• Check that the nut set in step 10 is not out of the position.
If it is, repeat the procedure from step 10.
12) Check for clearance between the end of the long hole in the
side lock and the inner cable end as shown. There must be
no clearance.
If there is clearance, repeat the procedure from step 7.
Check that the side lock is in contact with the stopper of the
L. side cover bracket.
13 mm (0.5 in)
[2]
L. SIDE COVER
BRACKET SIDE
[3] LOCK
NUT
[1]
COVER LOCK
CABLE A
[6] SIDE LOCK
13) Adjust the length between the end of the cable outer and
the end of the nut of the cover lock cable B (shorter one) so
that it is 13 mm (0.5 in) as shown.
14) Holding the nut in the position described in step 13,
position the inner cable end of the cover lock cable B on the
side lock and position the cable B nut on the L. side cover
bracket.
Tighten the washer side lock nut securely.
• Check that the nut set in step 13 is not out of the position.
If it is, repeat the procedure from step 13.
15) Check for clearance between the end of the long hole in the
side lock and the inner cable end as shown. There must be
no clearance.
If there is clearance, repeat the procedure from step 7.
Check that the side lock is in contact with the stopper of the
L. side cover bracket.
13 mm (0.5 in)
[1]
L. SIDE
COVER
BRACKET
SIDE
[6]
LOCK
NUT
[2] COVER
LOCK
CABLE B
[2] COVER LOCK
CABLE B
[3] SIDE LOCK
[4]
STOPPER
[5]
Contact.
[4] STOPPER
[5]
Contact.
[7] No clearance.
[7] No clearance.