BF135A•BF150A
5-119
1) Install the float valve and float pin to the float.
2) Set the float assembly on the vapor separator cover and
tighten the two screws to the specified torque.
TORQUE: 2.1 N
•
m (0.21 kgf
•
m, 1.5 lbf
•
ft)
3) Install the vapor separator grommets on the vapor separator
stay.
4) Install the vapor separator stay on the vapor separator
chamber and tighten the two 6 x 16 mm flange bolts to the
specified torque.
TORQUE: 12 N
•
m (1.2 kgf
•
m, 9 lbf
•
ft)
5) Install the collars on the vapor separator grommet.
6) Apply a thin coat of the engine oil to the new cover gasket
and install the gasket in the groove in the vapor separator
chamber securely.
7) Install the vapor separator cover and tighten the 5 mm
screw-washers to the specified torque.
TORQUE: 3.4 N
•
m (0.35 kgf
•
m, 2.5 lbf
•
ft)
[1]
COLLAR (2)
6 x 16 (2)
[4]
FLOAT VALVE
[2]
FLOAT PIN
[3]
FLOAT
[3]
VAPOR SEPARATOR
STAY
[1]
5 mm SCREW-
WASHER (6)
[4]
VAPOR
SEPARATOR
CHAMBER
[2]
VAPOR
SEPARATOR
COVER
[2]
VAPOR SEPARATOR
GROMMET (2)
[5]
VAPOR
SEPARATOR
COVER
[1] SCREW (2)
[3]
COVER GASKET
Do not reuse.