![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757317.webp)
6-6
b. REMOVAL
Remove the following pars.
– Engine cover (P. 4-2)
– Silencer duct (P. 6-2)
1) Disconnect the battery negative (-) cable from the battery
negative terminal.
Disconnect the alternator 4P connector.
Disconnect the alternator fuse cable from the alternator
assembly.
2) Loosen the 10 x 80 mm flange bolt and the 8 mm flange
nut.
3) Loosen the special adjusting bolt and move the alternator
assembly to the engine side as full as it goes.
[1] 8 mm
FLANGE
NUT
[2] SPECIAL
ADJUSTING
BOLT
[3]
ALTERNATOR
ASSEMBLY
10 x 80
4) Detach the alternator belt from the alternator pulley first,
then from the crankshaft pulley.
Remove the alternator belt.
• Do not contaminate the alternator belt with oil and grease
after removal.
• Do not bend the alternator belt. Store the belt by hanging
it on the wall.
[1] ALTERNATOR
BELT
[2] CRANKSHAFT
PULLEY
[3] ALTERNATOR
PULLEY
[1] ALTERNATOR
4P CONNECTOR
[2]
ALTERNATOR
FUSE CABLE
[3]
ALTERNATOR B TERMINAL
WASHER-NUT