10-32
11. CYLINDER HEAD ASSEMBLY
INSTALLATION
• Do not let any foreign material enter the gap between the
gasket, cylinder head and the cylinder block.
• Take care not to damage (scores, scratches, etc.) the cylinder
head and the cylinder block at the mating surface with the
gasket.
• Do not bend the cylinder head gaskets as they are the metal
gaskets.
• Keep the cam chain away from the magnetic parts.
1) Clean the cylinder head and cylinder block mounting
surfaces.
2) Install the two dowel pins on the cylinder block.
Install a new cylinder head gasket on the cylinder block by
setting the projection of the cylinder head gasket in the
position shown.
3) Align the “
” mark on the crankshaft sprocket with the
“
” mark on the cylinder block.
NOTICE
4) Align the dowel pins on the cylinder block with the dowel
pin installation positions of the cylinder head assembly as
shown, and install the cylinder head assembly on the
cylinder block.
[3] 14 x 20 mm
DOWEL PIN (2)
[2]
CYLINDER
HEAD
GASKET
[1]
PROJECTION
[2] “
” MARKS
[1] CRANKSHAFT
SPROCKET
[1]
CYLINDER HEAD
ASSEMBLY