![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757490.webp)
14-23
d. ASSEMBLY
1) Apply gear oil to the circumference of the new needle
bearing.
2) Install the needle bearing on the propeller shaft holder
using the special tools and the hydraulic press.
TOOLS:
Attachment, 62 x 68 mm
07746-0010500
Outer driver attachment, 30 x 37
070PD-ZY60200
Install the needle bearing with the stamped side toward the
special tools.
NOTICE
3) Apply soapy water to the circumference of the new 30 x 45
x 7 mm water seals.
4) Drive the 30 x 45 x 7 mm water seals one by one into the
propeller shaft holder using the special tool. Note the
installation direction of the water seals.
Apply grease to the water seal mating surfaces before
installation.
TOOL:
Oil seal driver
07947-SB00100
5) After installation of the water seals, apply grease to the
water seal lips.
[1]
ATTACHMENT,
62 x 68 mm
07746-0010500
[2]
OUTER DRIVER
ATTACHMENT,
30 x 37
070PD-ZY60200
[4]
PROPELLER
SHAFT HOLDER
[3]
30 x 37 x 26 mm
NEEDLE BEARING
[4]
OIL SEAL DRIVER
07947-SB00100
[5]
PROPELLER
SHAFT HOLDER
[1] 30 x 45 x 7 mm
WATER SEALS
[2] <Water seal installation
direction>
[3]
(Apply grease to the
water seal mating
surfaces and the lips.)