![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757289.webp)
BF135A•BF150A
5-136
13. FUEL INJECTOR/PRESSURE
REGULATOR
a. FUEL LINE ASSEMBLY REMOVAL
• Relieve the fuel pressure before removing the fuel injectors.
• Disconnect the battery cable from the battery negative (–)
terminal before relieving the fuel pressure.
• Replace the sealing washer with a new one when the ser-
vice check bolt had been loosened or removed.
1) Remove the engine cover and the L. engine under cover.
2) Relieve the fuel pressure according to “HOW TO RELIEVE
FUEL PRESSURE” (P. 5-102).
3) Remove the two 8 x 55 mm flange bolts and move the L.
side cover bracket out of position.
4) Remove the three main harness clips from the respective
clip brackets.
5) Disconnect the connector from each injector.
6) Remove the hose clip. Clamp the pressure regulator return
hose and the main wire harness.
[3]
MAIN WIRE
HARNESS
[5]
CLIP BRACKET
[1] HOSE CLIP
[4]
INJECTOR 2P
CONNECTOR
[2]
CLIP
8 x 55 (2)
[1]
L. SIDE COVER BRACKET
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.