Hioki MR8740, Инструкция по эксплуатации

Страница: 223 / 424

9.2 Settings for Numerical Value Calculation
211
Chapter
9 Nume
rica
l Calcula
tion F
unct
ions
89
(2)
Select the channel for calculations.
Move the flashing cursor to the item for the calculation tar-
get, and select the channel.
(A logic channel can also be selected for Time to Level, Pulse Width, Duty
Cycle, and Pulse Count.)
(3)
Set parameters.
Settings may not be necessary for some calculation types
When calculating time differences and phase contrast,
makes settings for A and B channels.
Move the flashing cursor to the parameter items, and make
appropriate parameter settings.
See: "Parameter table" (p.212)
See: "7.1.3 Alphanumeric Input" (p.139)
(4)
Set the statistical calculation.
Move the flashing cursor to the [ Stat ] column.
Select
(5)
When time difference calculation or phase contrast cal-
culation has been selected, set Ch (channel) and param-
eters for A and B.
4
Execute the calculations. (when judging calculations
(p.214))
Applying Calculations to Existing Data
Select [Exec] .
When calculating automatically after measurement
Click [START] to start measurement.
First Calculate at the first condition of the measurement data.
Average Acquire the average value of the calculation result in the
measurement data.
Max Acquire the maximum value from the calculation result in
the measurement data.
Min Acquire the minimum value from the calculation result in
the measurement data.
When saving calculation results during
measurement
Settings must be made before the mea-
surement.
See: "9.4 Saving Numerical Calculation
Results" ( p.217)
When saving existing data
Click [SAVE] .
See: "4.2.3 Saving Data Selectively
(SAVE)" (p.91)
To copy a calculation setting to another calculation number
Use the [Num Calc] sheet.
See: "7.8 Copying settings to other channels (calculation No.) (Copy function)" (p.158)