Hioki MR8740, Инструкция по эксплуатации

Страница: 110 / 424

4.3 Loading Data
98
Loading Example (Loading a Memory Division File)
1
Right-click to display the list menu, and then click [FILE] .
2
Double-click the SEQ file in the folder created in step 8 of "Saving a Memory Division
Waveform File", and then click [Exec] to load the waveform data on the instrument so that
it becomes the same as when each memory block was saved.
3
Double-click a MEM file in the folder created in step 8 of "Saving a Memory Division Waveform
File", and then click [Exec] to load only the waveform data of that block to the instrument.
Double-click this,
and then click
[Exec] on the right
of the screen.
When loading from a source other than the internal memory
Insert the storage media before making the media selection.
Other limitations
• Data saved with Memory HiCorders other than the MR8740
/MR8741,
MR8847s
and
M
R8827 cannot be loaded.
• When loading waveform data, the settings for the instrument are the same set-
tings as when the data is saved. To reset to the instrument settings, carry out
[Clear Wave Data] (p.368) or start the measurement.