manualshive.com logo in svg

Hioki MR8740, Инструкция по эксплуатации

Поделиться
Скачать
Hioki MR8740 Скачать руководство пользователя страница 34

1.5  Basic Operations

22

You can use a mouse to make various settings on the instrument. This section explains how to per-
form mouse operations.

Use a commercially available USB mouse to operate the instrument.

The following describes how to operate the instrument with a mouse:

1.5 Basic Operations

1.5.1 Mouse Operations

• There are a variety of mice available, and not all mice will work with the instru-

ment.

• The instrument's USB ports are designed exclusively for use with mice and

USB memory sticks. Do not connect any other type of device.

• With some USB devices, the instrument may not start up if the power is turned

on while the USB device is connected to a USB connector. If that happens,
connect the USB device after turning on the power.

• When the instrument is operated with a mouse, some screens may not display

properly.

• External interference may cause the mouse to malfunction. Keep the mouse

and mouse cable as far away as possible from sources of interference.

• Do not use a USB hub because mouse operation may not be possible. Also,

do not connect two mice.

Right-click

Displays a menu with a list of screens. 
Grayed-out screens cannot be dis-
played.

Center wheel

Changes the selected item.

On the File screen, you can use the 
center wheel to change the selected 
file. When measuring with memory 
division, you can use the center 
wheel to change the displayed 
block.

On the Waveform screen, you can 
use the center wheel to scroll the 
waveform or move the A/B cursors.

Left-click

Left-click to select menus and to select items 
on menus. When measuring with memory di-
vision, you can change the displayed block by 
double-clicking.
Click the current path shown on the File 
screen to move one level up in the folder hier-
archy.

Up/down/left/right

Moves the mouse cursor up, down, left, and 
right on the screen.

Convenient features: Shortcut operations

Drag the mouse in any of the following directions while the right mouse button is held down to perform the corre-
sponding shortcut operation.

 

Drag right: START operation

 

Drag left: STOP operation

 

Drag up: ESC operation

Содержание MR8740









































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды