Hioki MR8740, Инструкция по эксплуатации

Страница: 307 / 424

13.2 Setting the Waveform Area
295
11
Chapte
r 13 W
aveform Evaluation Fun
ctio
n (MR87
41 Only)
12
13
Creating a new evaluation area
Setting method
Procedure Screen: STATUS
1
Click
[STATUS]
to call the Status screen.
2
Move the flashing cursor to Waveform Judge.
3
Select [Edit] from the GUI displayed on the
screen.
4
Make the new evaluation area.
See:
"13.5 Creating the Evaluation Area" (p.299)
5
Store the new evaluation area in the internal
memory.
6
After setting the parameters for "Waveform
Judge setting" and "Stop Mode," click
[DISP]
to
make the Waveform display screen appear,
and then click
[START]
to initiate measurement.
7
Save the evaluation area on the File screen, if
it s necessary.
See:
"4.2 Saving Data" (p.85)
Only one waveform evaluation area is stored in internal memory. For example,
when operation is changed from the Memory function screen to the X-Y screen
and the X-Y screen waveform evaluation area is stored, the waveform evaluation
area created for the Memory function is lost.
Function:FFT
Function:MEMORY