Hioki MR8740, Инструкция по эксплуатации

Страница: 100 / 424

4.2 Saving Data
88
7
Select the channel to save.
Move the flashing cursor to the [Save Channel] item.
Select
8
Specify the action if a file with the same name exists in the
target folder.
Move the cursor to [Same Name] .
Select
9
Set whether to create folders.
Move the flashing cursor to the [Folder to save] item.
Select
When [LAN] is set as the save destination, [New Folder] setting is ignored and
the folder named with the current date is created.
10
Set the save method for when the storage media runs out of space.
Move the flashing cursor to the [Save method] item.
Select
When [LAN] is set as the save destination, [Save Name] setting is ignored and
the files to be saved are named in the previously-determined format.
See:
"Save Operations (When setting the save destination to [LAN])"
(p.90)
11
Confirm the measurement configuration and other settings,
then start measurement (
[START] ).
After the data is acquired, the screen image is saved automatically to the specified
storage media.
Disp Ch Saves the channels of all sheets for which waveform display is set
to
[On] . (default setting)
All Ch Saves all measured channels (in the case of the memory function,
channels has been set as
[Used Ch] on the Status settings screen).
Auto If no files with the same name exist, saves the file with the desig-
nated name. Otherwise, a 4-digit number is automatically added to
the beginning of the file name (default setting).
If the first character of the file name is a numeral, the added num-
ber will continue sequentially from that number.
Serial Unconditionally, a 4-digit number is automatically added to the be-
ginning of the file name. If a file with the same name exists, saves
the file, adding the 4-digit number that is increased by 1.
No A folder is not created when measurement starts.
Yes A folder is created automatically when measurement starts and
files are saved in the folder.
Normal
Save Automatic saving stops when the storage media becomes full.
Delete
Save Old files are deleted and automatic saving is performed when the
storage media becomes full. (Waveform files only.)
The
[Folder to save] setting is set automatically to [Yes] .
7
8
9 7
9
10
Maximum number of files per folder
The combined maximum for files and folders created in one folder is 5,000.
See: "Save Operations (When setting the save destination to [LAN])"(p.90)
To clear the Auto Save dialog box
Click [SAVE] to turn the dialog box display on and off.