Hioki MR8740, Инструкция по эксплуатации

Страница: 103 / 424

4.2 Saving Data
91
4
Chapte
r 4 Saving/L
oading Dat
a & Ma
nagin
g Files
To perform quick saving by clicking [SAVE] in the right-click menu, you need to set the saving con-
ditions beforehand. The type of data to be saved are as following. (Settings data, waveform data,
display screens, waveform screen, numerical calculation results)
4.2.3 Saving Data Selectively (SAVE)
Procedure
To open the screen: Right-click and select [SYSTEM]
→
[File Save] sheet
1
Set the save method for when [SAVE] is clicked.
Move the flashing cursor to the [Select at save] item, and select
[No] .
Select
When [Yes] is selected, the following setting determines which dialog box appears
when clicking [SAVE] . (Middle screen at right)
However, this is not applicable when other dialogs such as “Folder Reference Di-
alog” are shown on the screen.
2
Set the save destination.
Move the flashing cursor to the [Save To] , and select [Edit] .
The Browse folders dialog box appears (at bottom right).
Move the flashing cursor to the save target media
*
and confirm
the setting with [Confirm] .
Select
When the root directory (topmost folder on media) was selected, a folder named
"
HIOKI_MR8740 " or " HIOKI_MR8741 " is created automatically. (If the media was
initialized in the instrument, the folder will already have been created.) This folder
is then used as save target.
To create a new folder, select [New Folder] . When [LAN] is set
as the save destination, [New Folder] setting is ignored and the
folder named with the current date is created.
3
Set the file name.
Move the flashing cursor to the [Save Name] , and enter a save
name.
See: "7.1.3 Alphanumeric Input" (
⇒
p.139)
When
[LAN]
is set as the save destination,
[Save Name]
setting is
ignored and the files to be saved are named in the previously-
determined format.
See:
"Save Operations (When setting the save destination to [LAN])"
(p.90)
Yes After clicking [SAVE] , set the data to save in the dialog box, then
save the data. (default setting)
See: "Selection Save"(p.85)
No The preset data is saved upon clicking [SAVE] .
See: "Quick Save"(p.85)
USB1 Automatically save the waveform data on the USB memory stick.
LAN Automatically save the waveform data on the PC connected via
LAN. Model 9333 LAN Communicator is required to be installed.
1
2
3
File Name
The maximum number of characters for the [Save Name] string is 123. The
maximum path length including file name is 255 characters.