Hioki LR8400-20, Инструкция по эксплуатации

Страница: 268 / 300

Appendix 2 Error Messages and Remedial Actions
A
6
506 File system error (incorrect device).
Turn the HiLogger off and back on. If the fault per-
sists, perform system reset (p. 153).
507
File system error (file protected).
The requested write process (including deletion)
could not be performed because the file attribute is
read-only. Use a PC to cancel the read-only setting.
508
File system error (failed to recog-
nize the format).
The removable storage could not be recognized.
Reformat the removable storage on a PC. If the error
persists, try a different removable storage.
If this error occurs while using a good removable
storage, the HiLogger may be damaged, in which
case contact your dealer or Hioki representative.
509
File system error (limit of the num-
ber of files).
The number of files to be processed exceeds the limit,
so processing cannot be performed. Delete files to in-
crease free space, or try another removable storage.
510
File system error (same name file).
An attempt was made to create a file with the same
name as an existing file. Change the name of the file
to be created (p. 139).
511
File system error (system busy).
Processing could not be performed because files
are in use by another executing process. Wait for the
current process to finish. If there is no other execut-
ing process, turn the HiLogger off and back on.
512
File system error (too long path
name). The specified path name is too long. Re-enter the
name of a removable storage folder from the PC.
513 File system error (no file).
Turn the HiLogger off and back on. If the fault per-
sists, perform system reset (p. 153).
514 File system error (mode error).
515 File system error (invalid file handle).
516
File system error (file offset error).
517
File system error (not enough ca-
pacity).
Insufficient free space is available on the removable
storage for the process to execute. Delete files to in-
crease free space, or try another removable storage.
518
File system error (invalid file
name). The file name contains an invalid character. Rename
the file (p. 139).
519
File system error (directory error).
Turn the HiLogger off and back on. If the fault per-
sists, perform system reset (p. 153).
520
File system error (invalid file type).
521 File system error (file rename error).
522
File system error (internal parame-
ter error).
523
File system error (block size error).
524
File system error (semaphore error).
525
File system error (not supported
action).
603 Communication error. Check communication settings.
620 Bad MAC address.
The HiLogger's MAC address has been improperly
altered. Please contact Hioki.
621
Bad IP address. Check the IP address setting.
Message Remedial Action