Hioki LR8400-20, Инструкция по эксплуатации

Страница: 270 / 300

Appendix 3 File Naming
A
8
File names are constructed as follows (must be exactly eight characters, not
including extension).
Appendix 3
File Naming
W A V E 0 0 0 1 . M E M
1. File Type
2. Automatic serial number
3. File Extension
File Type Folder Name 1. File Type 2. Automatic serial number
3. File Ex-
tension
Settings Data
CONFIG CONF
0001,... 99999999 .SET
Waveform Data
DATA
(Folders named
by date are au-
tomatically cre-
ated) *2
Manual Save: WAVE
Auto Save: (specified
name) or AUTO
0001, ...99999999
*1
.MEM (Bi-
nary)
.CSV (Text)
*3, *4
Numerical Cal-
culation Results
(calculation re-
sults from start to
stop)
MEASURE-
MENT/ALL
Manual Save: MEAS
Auto Save: (specified
name) or AUTO
When [N-Calc. Data Sav-
ing] on the System screen
is set to [Single file] : 0001
to any available number
When
[N-Calc. Data Sav-
ing] on the System screen
is set to [Split save] : Cal-
culations 1 to 6 are includ-
ed in files with _1 to _6
appended to the serial
number (0001 to any avail-
able number).
.CSV *3, *4
Numerical Cal-
culation Results
(calculation re-
sults for each
split interval
when split calcu-
lation is enabled)
MEASURE-
MENT/PART
.CSV *3, *4
Captured
Screen Image
PICTURE SCR
00001...99999999
.BMP
*1 When auto saving waveform data and calculation results, automatically generated serial numbers
(up to eight digits) are appended to the specified file name. If no file name is specified, AUTO is
automatically entered.
(XXXX0001.MEM, XXX00001.MEM, XX000001.MEM, X0000001.MEM)
When auto numbering exceeds 9999, the file name characters are overwritten (right to left) until
all eight digits are used for serial numbers. (Example: WAVE9999.MEM, WAV10000.MEM, .. )
*2 When [Deleting] is enabled with auto save, the oldest waveform file is deleted when the CF card
is full. When all waveform files within a date folder have been deleted, the folder name (date) is
automatically updated.
(Example:) Before updating: 08-07-17
After updating: 08_07_17_080719_101113 (old date_new date _new day and time)
Hyphens (-) are changed to underbars (_) and the date when the folder name was last changed
is appended. (The example shows a new date and time of July 19th 2008, 10:11:13.)
*3 The TXT file extension is applied except when [Separator:Comma] is selected on the [System]
screen.
*4 Before loading data into a spreadsheet program such as Excel, note that the number of rows that
can be loaded at one time is limited (to 60,000 rows in Excel 97 – 2003, and to one million rows
in Excel 2007).
Larger CSV files can be split by the following methods:
•Use a CSV file-splitting program (downloadable for free from Hioki's website).
•Before saving, select the
[Split Save] saving method in the HiLogger.
Note: The number of rows recorded per minute with 10 ms recording interval is:
100 (data points per second) x 60 (seconds) = 6,000 rows