Hioki LR8400-20, Инструкция по эксплуатации

Страница: 232 / 300

10.7 Sending E-Mail
220
Increment/decrement by 1
Increment/decrement by 10
1
Numerical Settings
Character Settings
See:
"3.7 Entering Titles and Comments
(as needed)" (p. 73)
1
Enable or disable the [Send Mail to
Address] .
Up to three addresses can be entered.
(When [Send Mail to Address] ) is
enabled)
2
Enter the [Send Mail to Address] .
Enter the recipient's e-mail address for
notifications.
3
Set each item (p. 221).
4
Configuring [Timing] .
Select the check boxes for the desired
mail sending criteria.
Setting options: (
∗
: default setting)
Off
∗
Mail is not sent.
On Mail is sent.
Setting options:
Up to 32 characters
(e.g., abc@xyz.xx.xx)
Setting options:
Start
Trig Send mail when a Start trigger
event occurs.
(for example, to notify a start-
ing trigger)
Stop
Trig Send mail when a Stop trigger
event occurs.
Alarm Send mail when an alarm
event occurs.
Start
Bup Send mail upon recovery from
a power outage.
Mem
Full Send mail when HiLogger in-
ternal memory is full and old
data begins to be overwritten.
Mail is sent only once: the first
time memory becomes full.
Card
Full Send mail when the CF card or
USB flash drive becomes full.
2
3
4