Hioki LR8400-20 Скачать руководство пользователя страница 269

Страница: 269 / 300

Appendix 2 Error Messages and Remedial Actions

Appendix

622

Bad server IP address.

Check the server IP address setting.

623

Can not connect to server.

Check settings and connections.

625

Connection timed out.

Check the connection destination.

626

Transfer was aborted.

Check the connection destination.

627

Network error.

Check the HiLogger and connection destination.

628

Server not found or DNS failed.

Check the DNS IP address and connection.

629

DHCP failed.

Check the connections.

630

Password error.

Check the password character string. The password
is case sensitive.

632

Bad FTP server IP address.

Check the IP addresses for FTP auto sending.

633

Can not connect to FTP server.

Check the FTP auto sending settings and connections.

634

Can not find FTP server/DNS
failed.

Check the FTP auto sending settings, DNS IP ad-
dress, and connections.

635

Bad Mail server IP address.

Check the mail server IP address setting.

636

Can not connect to Mail server.

Check the mail server settings and connections.

637

Can not find Mail server/DNS
failed.

Check the mail server settings, DNS IP address, and
connections.

638

Bad POP server IP address.

Check the POP server IP address setting.

639

Can not connect to POP server.

Check the POP server settings and connections.

640

Can not find POP server/DNS failed.

Check the DNS IP address and connection.

660

Can not change while communica-
tion.

This item cannot be changed by remote operation.

661

FTP Auto Transfer has been
changed.

FTP auto sending settings changed due to auto-
save setting change.

662

Please set Auto Save to Binary.

FTP auto sending is only available when auto saving
is not binary.

663

Automatic data transfer via FTP is
not possible while data is being
saved.

Obtain manually the data file, if unable to be trans-
ferred, or copy the data to PC from the storage me-
dia.

664

FTP data transfer failed. File not
found.

Message

Remedial Action

Содержание LR8400-20













































































































































































































































































































Результаты поиска

Содержание LR8400-20

Отзывы:

Бренды по названию

Популярные бренды

Hioki LR8400-20, Инструкция по эксплуатации

Результаты поиска

Содержание LR8400-20

Отзывы:

Бренды по названию

Популярные бренды