Hioki LR8400-20, Инструкция по эксплуатации

Страница: 171 / 300

8.1 Calculate Average, Maximum, Minimum, and Etc.
159
3
Cha
p
te
r 8
Numerical Cal
c
ula
tions/W
a
veform Cal
c
ula
tions
8
After measuring, calculation can be applied to a specified time span.
Make any other calculation settings before specifying the calculation time span (P.158 , 1
to 5).
Apply Calculations to a Specific Time Span (Manual Calculation
Only)
1
4
Press the left/right SCROLL/CUR-
SOR keys to move the A/B cursors
to specify the time span.
See:
Changing the cursor to move (p. 92)
Move to a [Span] item.
3
Apply
Open the setting options
for the item to be set.
Select [Sw to Calc] .
Apply
5
Select [Exec] .
Apply
The results of calculations are
displayed.
Press SCROLL/CURSOR to display
A/B cursors.
4
5
Select the calculation time
span.
See the table at the right for set-
ting choices
Setting options: (
∗
: default setting)
All * The entire acquired waveform
A-B The time span between cursors
A and B
Start-A From the start of the acquired
waveform to cursor A
Start-B From the start of the acquired
waveform to cursor B
A-End From cursor A to the end of the
acquired waveform
B-End From cursor B to the end of the
acquired waveform
2
1
2