Hioki LR8400-20, Инструкция по эксплуатации

Страница: 193 / 300

10.2 LAN Settings and Connections (Before connecting to the network)
181
3
Chapter 10
Connec
tion t
o
a
PC (
C
ommunic
a
tion)
10
Setting Items
Authorization User Name and Password
These are used when you login to the HiLogger by FTP, or use a PC browser (with the
authorization setting set to on).
When authorization is enabled, login is not possible unless a correct user name and
password are entered. This setting is recommended if you wish to restrict the users who
can access the HiLogger.
The "Password" item is displayed as "************".
Valid characters: Alphabetic characters and symbols
If you want to allow anyone to access, or you wish to login as "anonymous" with a FTP client, leave the
user name and password fields blank.
Use DHCP
∗
∗
: Dynamic Host
Configuration
Protocol
DHCP is a protocol that allows devices to automatically obtain and set their
own IP addresses.
If you enable DHCP and there is a DHCP server operating in the same net-
work, the HiLogger's IP address, subnet mask, and gateway can be ob-
tained and set automatically.
Host Name
This is a name that identifies the HiLogger on the network. Assign a host
name that is different from the names of all other devices. This HiLogger
does not support dynamic DNS, the name that you set is not registered with
a DNS server.
IP Address
This is an address that identifies an individual device on a network.
Assign an address that is different from the addresses of all other devices.
If DHCP is enabled, the address is assigned automatically by the DHCP
server.
Subnet Mask
This is a setting used to divide an IP address shown to the network into a
network address and a host address. Use the same subnet mask for all de-
vices in the same network. If DHCP is enabled, the subnet mask is assigned
automatically by the DHCP server.
Use Gateway
IP Address
For network connections:
When your PC (or the communicating device) is on another network than
this HiLogger, set this to [On] and specify the gateway device. When the PC
is on the same network, this is usually set to the same address as the de-
fault gateway in the PC communications settings.