Hioki LR8400-20, Инструкция по эксплуатации

Страница: 267 / 300

Appendix 2 Error Messages and Remedial Actions
A
5
Appendix
407 Insert CF card or USB memory.
A CF card or USB flash drive is not present.
Insert storage media.
408
Preparing to protect files. Allow about three minutes for the capacitor to charge.
430 Unsaved data present.
The removal storage is not inserted, or does not
have enough free space.
Insert a removal storage and manually save needed
data.
431 Insert media to save waveform data. Insert a removal storage.
432 Change media.
Removable storage cannot be accessed. Replace
the CF card or USB flash drive.
434
Media is full or cannot delete old-
est wave file.
This may appear while measuring using waveform
auto save.
A file could not be saved: Not enough space on the
removable storage.
435
Media is nearly full.
Not enough space on the removal storage.
Replace with a new removal storage.
436 Saving interrupted (Low battery).
Battery charge is too low to save. Recharge, or con-
nect the AC adapter.
437
Saving wave data.Wait for a mo-
ment.
Some key operations are disabled because of the in-
creased load during real-time saving.
Minimize key operations as much as possible during
real-time saving.
438
This folder is protected. Rename
for deleting. This message is displayed to prevent accidental dele-
tion of data folders. To delete a folder, first rename it.
441
Insert the recording media.
Unsaved data will be lost soon.
Real-time saving was attempted without removable
storage, and with less than 50% internal memory
available. Insert removable storage.
442 File name is too long to change.
The HiLogger cannot rename files with names long-
er than 26 characters. Use a PC to rename the file.
501
File system error (I/O error).
An I/O error occurred while accessing the removal
storage. Reformat the removal storage. If the error
persists, try a different removal storage.
If this error occurs while using a good removal stor-
age, the HiLogger may be damaged, in which case
contact your dealer or Hioki representative.
502
File system error (Incorrect file
handle).
Turn the HiLogger off and back on. If the fault per-
sists, perform system reset (p. 153).
503
File system error (system configu-
ration).
504
File system error (not enough
memory).
505
File system error (incompleted in-
formation).
The removable storage could not be recognized.
Reformat the removable storage on a PC. If the error
persists, try a different removable storage.
If this error occurs while using a good removable
storage, the HiLogger may be damaged, in which
case contact your dealer or Hioki representative.
Message Remedial Action