hilscher CIFX Series, Руководство пользователя

Страница: 206 / 299

Technical Data 206/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
CIFX 90E-2CO\DN\ET\F,
CIFX 90E-2CO\DN\MR\ET\F Parameter Value
FLASH 4 MB serial Flash EPROM
Size of the Dual-Port Memory 64 KByte
MRAM (only CIFX 90E-
2CO\DN\MR\ET\F) 128Kbyte (= 64K Words);
Note: Using the cifX Device Driver (from Version 1.1.1.0)
access to this memory is possible and it can be used as a
remanent memory.
Bus Type Mini PCI Express One Lane Port, according to [bus
spec 2] and [bus spec 6], refer to section
Overview , page
165 and Pin Assignment for Mini PCI Express Bus / SYNC
Connector (Bootstart), X1/X2 , page 168.
Transmission Rate 33 MHz
Data Access DPM or DMA (Direct Memory Access)
System Interface
Width for the data access to the
Dual-Port Memory (DPM) 32-Bit
CANopen
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) CANopen Master,
CANopen Slave
Transmission rate 10 kBit/s, 20 kBit/s, 50 kBit/s, 100 kBit/s, 125 kBit/s,
250 kBit/s, 500 kBit/s, 800 kBit/s, 1 MBit/s
Interface Type ISO-11898, refer to section CANopen Interface , page 154.
CANopen detached Network
Interface
AIFX-CO, refer to section AIFX-CO , page 230.
Important! Operating the PC card CIFX 90E-2CO\DN\ET\FF or
CIFX 90E-2CO\DN\MR\ET\F requires proper connection of the
CANopen detached network interface (AIFX-CO) and of the
DeviceNet detached network interface (AIFX-DN) to the basic
card!
CANopen Interface
Connector AIFX-CO Connector Fieldbus X3
(JST 10FMN-SMT-A-TF(LF)(SN), Pitch 1,0 mm)
DeviceNet
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) DeviceNet Master,
DeviceNet Slave
Transmission rate 125 kBit/s, 250 kBit/s, 500 kBit/s
Interface Type ISO-11898 according to DeviceNet specification,
refer to section
DeviceNet Interface , page 155
DeviceNet detached Network
Interface AIFX-DN, refer to section AIFX-DN, page 231.
Important! Operating the PC card CIFX 90E-2CO\DN\ET\FF or
CIFX 90E-2CO\DN\MR\ET\F requires proper connection of the
CANopen detached network interface (AIFX-CO) and of the
DeviceNet detached network interface (AIFX-DN) to the basic
card!
DeviceNet Interface
Connector AIFX-DN
Connector Fieldbus X4
(JST 10FMN-SMT-A-TF(LF)(SN), Pitch 1,0 mm)
SYS System Status LED Display LED Display
For the LEDs at AIFX-Co at channel X1, refer to section
AIFX-CO , page 230.
For the LEDs at AIFX-DN at channel X2, refer to section
AIFX-DN, page 231.
Supply Voltage +3.3 V dc ±5 %, refer to section Power Supply and Host
Interface , page 61.
Important! For all PC cards cifX Mini PCI Express, the increase of
the supply voltage from 0V to 3.3V must last longer than 180 μ s.
Current consumption at 3.3 V 800 mA (maximum)
Power supply
Connector Via Mini PCI Express Bus
CIFX 90E-2CO\DN\ET\F, CIFX 90E-2CO\DN\MR\ET\F Environmental
Conditions
Operating temperature range* -20 °C ... +70 °C