Hardware Installation and Uninstalling
101/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
6.2 Installing PC Cards cifX Compact PCI
1. Adhere to the necessary safety precautions for components that are
vulnerable with electrostatic discharge.
Electrostatically sensitive Devices
¾
To prevent damage to the PC and the PC card cifX, make sure, that the
PC card cifX is grounded via the endplate and the PC and make sure,
that you are discharged when you install/uninstall the PC card cifX.
2. Fix front plate sticker (only for CIFX 80-RE).
¾
Use the sticker according to the firmware and glue it on the front of the
PC card CIFX 80-RE (see section
Fix Front Plate Sticker at CIFX 80-RE
3. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
¾
Disconnect the power plug of the PC or of the connecting device.
¾
Make sure, that the power supply is off at the PC or at the connecting
device.
4. Open cabinet.
¾
Open the cabinet of the PC or of the connecting device.
5. Install PC card cifX
Compact PCI
.
¾
Possibly remove a blank plate.
¾
Put down the ejection lever at the PC card cifX.
¾
Plug the PC card cifX into a free Compact PCI slot.
¾
Fasten the PC card cifX.
¾
Tip up the lever and click in.
¾
Screw the PC card cifX with two screws on the wholes above and
below.
After this:
6. Close cabinet.
¾
Close the cabinet of the PC or connecting device.
7. Plug the connecting cable to the Master or Slave.
¾
For the PC Cards cifX Real-Time Ethernet with RJ45 connectors note:
Note:
The RJ45 socket is only for use in LAN, not for telecommunication
circuits. For further information refer to section
on
page 151.
¾
Plug the connecting cable from the PC card cifX to the PC card Master
or Slave.
