hilscher CIFX Series, Руководство пользователя

Страница: 70 / 299

Getting Started 70/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
# Step Description For detailed
information see
manual / section Page
3.2 Open cabinet Now open the cabinet of the PC or of the
connecting device.
3.3 Installing cifX Plug in and mount the PC card cifX.
Installing PC Cards cifX
Compact PCI,
Installing PC Cards cifX
Mini PCI and Mini PCI
Express 101,
103
3.4 If so, plug module For PC Cards cifX PCI-104:
(a) Install the first PCI-104 module on the
mainboard.
(b) Install any other PCI-104 module on the
respective underlying PCI-104 module. Installing PC Cards cifX
PCI-104 109
3.5 Connect AIFX
(only for PC Cards cifX
Mini PCI, Mini PCI
Express and PCI-104
with label “\F” in its
device name and with
Cable Connector
Ethernet X4 or
Fieldbus X3)
Important! Operating the PC cards
cifX with AIFX detached network
interface requires proper
connection of the AIFX-RE, AIFX-
RE\M12, AIFX-DP, AIFX-CO, AIFX-
DN or AIFX-CC detached network
interface to the basic card! For 2-
channel devices both detached
network interfaces must be
connected.
Note for PC cards cifX with
2 channels, which detached
network interface must be
connected to the cabel connector
fieldbus X3 or X4 (on the PC card
cifX).
If so, connect an Ethernet (AIFX-RE or AIFX-
RE\M12), PROFIBUS (AIFX-DP), CANopen
(AIFX-CO), DeviceNet (AIFX-DN) or CC-Link
(AIFX-CC) detached network interface.
Note! If IP 67 is requried:
On the Ethernet AIFX-RE\M12
detached network interface, remove
the front LED lightpipe and route the
LED signals via the cable connector
LED signals X3 to the mainboard or
a separate detached LED board.
If so, additionally connect a diagnostic
detached network interface (AIFX-DIAG).
The Label „\F“ in the
Device Name
Table 44: How to assign
the detached Network
Interfaces for 2-Channel
Cards cifX Mini PCI
Express
44
106
To the basic card of each PC card cifX first
connect the AIFX-RE, AIFX-RE\M12, AIFX-
DP, AIFX-CO, AIFX-DN, AIFX-CC or AIFX-
DIAG detached network interface to the PC
card cifX and check if the connector is
plugged in correctly.
For PC cards PCI-104: Only then plug
another PCI-104 module.
3.6 Close cabinet Close the cabinet of the PC or connecting
device.
3.7 Plug the connecting
cable to the Master or
Slave Note for all PC Cards cifX Real-Time
Ethernet:
Note! The RJ45 socket is only for
use in LAN, not for telecommuni-
cation circuits.
Ethernet Interface 151