Hardware Installation and Uninstalling
107/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
Note:
The RJ45 socket is only for use in LAN, not for telecommunication
circuits. For further information refer to section
on
page 151.
¾
Plug the connecting cable from the PC card cifX to the PC card Master
or Slave.
12. Connect the PC or the connecting device to the power supply and
switch it on.
¾
Connect the PC or the connecting device to the power supply.
¾
Switch on the PC or the connecting device.
6.5 Uninstalling PC Cards cifX Mini PCI, Mini PCI Express
1. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
¾
Disconnect the power plug of the PC or of the connecting device.
¾
Make sure, that the power supply is off at the PC or at the connecting
device.
Electrostatically sensitive Devices
¾
To prevent damage to the PC and the PC card cifX, make sure, that the
PC card cifX is grounded via the endplate and the PC and make sure,
that you are discharged when you install/uninstall the PC card cifX.
2. Remove the connecting cable to the Master or Slave.
¾
Remove the connecting cable between the PC card cifX to be replaced
and the PC card Master or Slave.
3. Open cabinet.
¾
Open the cabinet of the PC or of the connecting device.
Uninstall AIFX detached Network Interface
4. Uninstall the Ethernet (AIFX-RE or AIFX-RE\M12), PROFIBUS (AIFX-
DP), CANopen (AIFX-CO), DeviceNet (AIFX-DN) or CC-Link (AIFX-CC)
detached network interface:
¾
Remove the AIFX-RE, AIFX-RE\M12, AIFX-DP, AIFX-CO, AIFX-DN or
AIFX-CC detached network interface from the housing panel of the PC.
¾
Disconnect the cable from the basic card of the PC card cifX Mini PCI
or Mini PCI Express; cable connector Ethernet X4 or cable connector
fieldbus X3.
