hilscher CIFX Series, Руководство пользователя

Страница: 198 / 299

Technical Data 198/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
10.1.15 CIFX 90E-2DP\ET\F, CIFX 90E-2DP\MR\ET\F
CIFX 90E-2DP\ET\F,
CIFX 90E-2DP\MR\ET\F Parameter Value
CIFX 90E-2DP\ET\F 1293.414 Name, Part No.
CIFX 90E-2DP\MR\ET\F 1293.416
Description
PC Card cifX Minfsddi PCI Express with 2 channels
PROFIBUS DP Master or Slave (as variants with
additional MRAM ‚MR’ and enlarged temperature range
‚ET’) composed of:sdf
- Basic card CIFX 9sfd0E-2FB\ET or CIFX 90E-
2FB\MR\ET with cable condsfnector Fieldbus X3
and
X4,
- PROFIBUS detached network interface (AIFX-DP).
Note: The device height and the power input of the PC Card Mini
PCI Express CIFX 90E-2DP\ET\FF and CIFX 90E-2DP\MR\ET\F
do not comply with the standard specifications.
Part
Function Communication Interface with Mini PCI Express and
2 x PROFIBUS interface
Communication
Controller Type netX 100 processor
RAM 8 MB SDRAM
FLASH 4 MB serial Flash EPROM
Size of the Dual-Port Memory 64 KByte
Integrated Memory
MRAM
(only CIFX 90E-2DP\MR\ET\F F) 128Kbyte (= 64K Words);
Note: Using the cifX Device Driver (from Version 1.1.1.0)
access to this memory is possible and it can be used as a
remanent memory.
Bus Type Mini PCI Express One Lane Port, according to [bus
spec 2] and [bus spec 6], refer to section
Overview , page
165 and Pin Assignment for Mini PCI Express Bus / SYNC
Connector (Bootstart), X1/X2 , page 168.
Transmission Rate 33 MHz
Data Access DPM or DMA (Direct Memory Access)
System Interface
Width for the data access to the
Dual-Port Memory (DPM) 32-Bit
PROFIBUS
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) PROFIBUS DP Master,
PROFIBUS DP Slave
Transmission Rate
9,6 kBit/s, 19,2 kBit/s, 31,25 kBit/s, 45,45 kBit/s,
93,75 kBit/s, 187,5 kBit/s, 500 kBit/s, 1,5 MBit/s,
3 MBit/s, 6 MBit/s, 12 MBit/s
Interface Type RS 485, refer to section PROFIBUS Interface page 154.
PROFIBUS detached Network
Interface AIFX-DP, refer to section AIFX-DP page 229.
Important! Operating the PC card CIFX 90E-2DP\ET\FF or CIFX
90E-2DP\MR\ET\F requires proper connection of both PROFIBUS
detached network interfaces (AIFX-DP) to the basic card!
PROFIBUS interface
Connector AIFX-DP Cable Connector Fieldbus X3 and X4
(JST 10FMN-BMT-A-TF(LF)(SN), Pitch 1,0 mm)
SYS System Status LED Display LED Display
For LEDs at AIFX-DP, refer to section AIFX-DP page 229.
Supply Voltage +3.3 V dc ±5 %, refer to section Power Supply and Host
Interface , page 61.
Important! For all PC cards cifX Mini PCI Express, the increase of
the supply voltage from 0V to 3.3V must last longer than 180 μ s.
Current consumption at 3.3 V 800 mA (maximum)
Power supply
Connector Via Mini PCI Express Bus
Environmental CIFX 90E-2DP\ET\F, CIFX 90E-2DP\MR\ET\F