Hardware Installation and Uninstalling
109/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
6.6 Installing PC Cards cifX PCI-104 (PCI-104-Modules)
Note:
For PC cards cifX PCI-104 with AIFX detached detwork interface
first install the basic card. Then connect the AIFX detached detwork
interface to the basic card.
1. Adhere to the necessary safety precautions for components that are
vulnerable with electrostatic discharge.
Electrostatically sensitive Devices
¾
To prevent damage to the PC and the PC card cifX, make sure, that the
PC card cifX is grounded via the endplate and the PC and make sure,
that you are discharged when you install/uninstall the PC card cifX.
2. Set the physical PCI-104 Slot Number.
¾
Set the physical PCI-104 Slot Number for each PCI-104 module. For
the PC cards cifX PCI-104 use the
Rotary Switch for PCI-104 Slot
Number
on the PC card cifX.
Note:
At maximum four PCI-104 modules can be plugged one upon the
other and each switch position may only be used once. The PCI-104
module plugged next to the host controller gets the CLK number 0, the
following PCI-104 modules respectively get the next higher CLK number.
For further information refer to section
Rotary Switch for PCI-104 Slot
3. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
¾
Disconnect the power plug of the PC or of the connecting device.
¾
Make sure, that the power supply is off at the PC or at the connecting
device.
4. Open cabinet.
¾
Open the cabinet of the PC or of the connecting device.
Note:
If several PCI-104 modules shall be put together in a stack:
(a) Install the first PCI-104 module on the mainboard.
(b) Only for the basic cards CIFX 104C-RE\F and CIFX 104C-RE-R\F or
the basic cards CIFX 104C-FB\F and CIFX 104C-FB-R\F: Connect the
AIFX-RE, AIFX-RE\M12, AIFX-DP, AIFX-CO, AIFX-DN, AIFX-CC
detached detwork interface and respectively AIFX-DIAG to the basic card
for the first PCI-104 module.
(c) Connect any other PCI-104 module on the respective underlying PCI-
104 module.
5. Install PC card cifX
PCI-104
.
¾
Plug the PC card cifX into a free PCI-104 slot (or if so, to the underlying
PCI-104 module).