Hardware Installation and Uninstalling
110/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
¾
Fix the PC card cifX using 4 spacing bolts and screws intended to the
mainboard (or if so, to the underlying PCI-104 module). The scope of
delivery does not include spacing bolts and screws.
Connect AIFX detached Network Interface
Only for the basic cards for CIFX 104C-RE\F and CIFX 104C-RE-R\F or the
basic cards CIFX 104C-FB\F and CIFX 104C-FB-R\F:
Note:
First connect the AIFX-RE, AIFX-RE\M12, AIFX-DP, AIFX-CO,
AIFX-DN or AIFX-CC detached detwork interface to each basic card PCI-
104, before plugging another PCI-104 module. Just so you can check
exactly whether the AIFX is properly connected to the basic card.
Important!
Operating the PC cards CIFX 104C-XX\F or CIFX 104C-XX-
R\F requires proper connection of the Ethernet (AIFX-RE or AIFX-
RE\M12), PROFIBUS (AIFX-DP), CANopen (AIFX-CO), DeviceNet
(AIFX-DN) or CC-Link (AIFX-CC) detached detwork interface to the basic
card!
Note:
If IP 67 is requried: On the Ethernet AIFX-RE\M12 detached
network interface, remove the front LED lightpipe and route the LED
signals via the cable connector LED signals X3 to the mainboard or a
separate detached LED board.
6. Mount the detached network interfaces at the housing panel of the PC.
¾
Install the used AIFX-RE, AIFX-RE\M12, AIFX-DP, AIFX-CO, AIFX-DN
or AIFX-CC detached network interfaces at the housing panel.
7. Connect the Ethernet detached network interface (AIFX-RE or AIFX-
RE\M12) to the basic card.
¾
Connect the
cable connector Ethernet X1
on the AIFX-RE (or cable
connector Ethernet X2 on the AIFX-RE\M12) with the cable.
¾
Connect the
cable connector Ethernet X4
(or X304) on the basic card
CIFX 104C-RE\F or CIFX 104C-RE-R\F with the cable.
AIFX-RE
with
Cable
Connector Ethernet
X1
Î
Example
CIFX 104C-RE\F
with
Cable Connector
Ethernet X4
Î
Figure 58: Connecting the Detached Network Interface Ethernet (AIFX-RE) to the Basic
Card CIFX 104C-RE\F (Example)
8. Or connect the PROFIBUS (AIFX-DP), CANopen (AIFX-CO),
DeviceNet (AIFX-DN) or CC-Link (AIFX-CC) detached network interface
to the basic card.
¾
Connect the
cable connector fieldbus X1
on the detached network
interface with the cable.
¾
Connect the
cable connector fieldbus X4
(or X304) on the PC card
CIFX 104C-FB\F or CIFX 104C-FB-R\F Fieldbus with the cable.