hilscher CIFX Series, Руководство пользователя

Страница: 204 / 299

Technical Data 204/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
CIFX 90E-2CO\ET\F,
CIFX 90E-2CO\MR\ET\F Parameter Value
Description PC Card cifX Mini PCI Express with 2 channels CANopen
Master or Slave (as variants with additional MRAM ‚MR’
and enlarged temperature range ‚ET’) composed of:
- Basic card CIFX 90E-2FB\ET or CIFX 90E-2FB\MR\ET
with cable connector Fieldbus X3
and
X4,
- CANopen detached network interface (AIFX-CO).
Note: The device height and the power input of the PC Card Mini
PCI Express CIFX 90E-2CO\ET\FF and CIFX 90E-2CO\MR\ET\F
do not comply with the standard specifications.
Function Communication Interface with Mini PCI Express and
2 x CANopen interface
Communication
Controller Type netX 100 processor
RAM 8 MB SDRAM
FLASH 4 MB serial Flash EPROM
Size of the Dual-Port Memory 64 KByte
Integrated Memory
MRAM
(only CIFX 90E-2CO\MR\ET\F) 128Kbyte (= 64K Words);
Note: Using the cifX Device Driver (from Version 1.1.1.0)
access to this memory is possible and it can be used as a
remanent memory.
Bus Type Mini PCI Express One Lane Port, according to [bus
spec 2] and [bus spec 6], refer to section
Overview , page
165 and Pin Assignment for Mini PCI Express Bus / SYNC
Connector (Bootstart), X1/X2 , page 168.
Transmission Rate 33 MHz
Data Access DPM or DMA (Direct Memory Access)
System Interface
Width for the data access to the
Dual-Port Memory (DPM) 32-Bit
CANopen
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) CANopen Master,
CANopen Slave
Transmission rate 10 kBit/s, 20 kBit/s, 50 kBit/s, 100 kBit/s, 125 kBit/s,
250 kBit/s, 500 kBit/s, 800 kBit/s, 1 MBit/s
Interface Type ISO-11898, refer to section CANopen Interface , page 154.
CANopen detached Network
Interface AIFX-CO, refer to section AIFX-CO , page 230.
Important! Operating the PC card CIFX 90E-2CO\ET\FF or CIFX
90E-2CO\MR\ET\F requires proper connection of both CANopen
detached network interfaces (AIFX-CO) to the basic card!
CANopen Interface
Connector AIFX-CO Connector Fieldbus X3 and X4
(JST 10FMN-SMT-A-TF(LF)(SN), Pitch 1,0 mm)
SYS System Status LED Display LED Display
For LEDs at AIFX-CO, refer to section AIFX-CO , page
230.
Supply Voltage +3.3 V dc ±5 %, refer to section Power Supply and Host
Interface , page 61.
Important! For all PC cards cifX Mini PCI Express, the increase of
the supply voltage from 0V to 3.3V must last longer than 180 μ s.
Current consumption at 3.3 V 800 mA (maximum)
Power supply
Connector Via Mini PCI Express Bus
CIFX 90E-2CO\ET\F, CIFX 90E-2CO\MR\ET\F
Operating temperature range* -20 °C ... +70 °C
Storage temperature range -40 °C ... +85 °C
*Air flow during measurment 0,5 m/s
Environmental
Conditions
Humidity 10 … 95% relative humidity, no condensation permitted