hilscher CIFX Series, Руководство пользователя

Страница: 220 / 299

Technical Data 220/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
10.1.26 CIFX 104C-CO\F, CIFX 104C-CO-R\F
CIFX 104C-CO\F,
CIFX 104C-CO-R\F Parameter Value
CIFX 104C-CO\F 1270.501 Name, Part No.
CIFX 104C-CO-R\F 1271.501
Description PC Card cifX PCI-104 CANopen Master or Slave
composed of:
- Basic card CIFX 104C-FB\F or CIFX 104C-FB-R\F* with
cable connector Fieldbus X304 (X4) and cable connector
DIAG X303 (X3) (*connectors at the left side)
- CANopen detached network interface (AIFX-CO) and
- diagnostic detached network interface (AIFX-DIAG).
Part
Function Communication Interface with PCI-104 and fieldbus
interface CANopen
Communication
Controller Type netX 100 processor
RAM 8 MB SDRAM
FLASH 4 MB serial Flash EPROM
Integrated Memory
Size of the Dual-Port Memory 64 KByte
Bus Type PCI-104, according to [bus spec 7], refer to section
Overview , page 165.
Transmission Rate 33 MHz
Data Access DPM or DMA (Direct Memory Access)
System Interface
Width for the data access to the
Dual-Port Memory (DPM) 32-Bit
CANopen
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) CANopen Master,
CANopen Slave
Transmission Rate 10 kBit/s, 20 kBit/s, 50 kBit/s, 100 kBit/s, 125 kBit/s,
250 kBit/s, 500 kBit/s, 800 kBit/s, 1 MBit/s
Interface Type ISO-11898, refer to section CANopen Interface , page 154.
CANopen detached Network
Interface AIFX-CO, refer to section AIFX-CO , page 230.
Important! Operating the PC card CIFX 104C-CO\F or CIFX
104C-CO-R\F requires proper connection of the CANopen
detached network interface (AIFX-CO) to the basic card!
CANopen Interface
Connector AIFX-CO Cable Connector Fieldbus X304 (X4)
(JST 10FMN-SMT-A-TF(LF)(SN), Pitch 1,0 mm)
Diagnostic detached Network
Interface AIFX-DIAG, refer to section AIFX-DIAG , Page 233. Diagnosis Interface
Connector AIFX-DIAG Cable Connector DIAG X303 (X3)
(JST 12FMN-SMT-A-TF(LF)(SN), Pitch 1,0 mm)
SYS System Status LED Display LED Display
For LEDs at AIFX-CO, refer to section AIFX-CO , p. 230.
Supply Voltage +5 V dc ±5 % or +3.3 V dc ±5 %, refer to section Power
Supply and Host Interface , page 61.
Current consumption
at 5 V …………………..
or
at 3.3 V…………………
500 mA (maximum)
650 mA (maximum)
Power supply
Connector Via PCI-104 Bus
Operation Rotary Switch
PCI-104 Slot Number To set the PCI-104 Slot Number, refer to section Rotary
Switch for PCI-104 Slot Number , page 156.
Operating temperature range* -20 °C ... +70 °C
( acc. to UL: 0 °C ... +55 °C )
Environmental
Conditions
*Air flow during measurment 0,5 m/s