hilscher CIFX Series, Руководство пользователя

Страница: 187 / 299

Technical Data 187/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
CIFX 90E-RE\F
and Variants Parameter Value
Open Modbus/TCP
POWERLINK Controlled Node/Slave
PROFINET IO-Controller (Master),
PROFINET IO-Device (Slave)
Sercos Master, Sercos Slave
VARAN Client (Slave)
Ethernet Frame Types Ethernet II
Transmission Rate 100 MBit/s,
10 MBit/s (depending on loaded firmware)
Interface Type 100 BASE-TX,
10 BASE-T (depending on loaded firmware),
refer to section
Ethernet Interface , page 151.
Half duplex/Full duplex depending on loaded firmware, supported (at 100 MBit/s)
Auto-Negotiation depending on loaded firmware
Auto-Crossover depending on loaded firmware
Detached network interface
Ethernet,
detached network interface
Ethernet M12 AIFX-RE, refer to section AIFX-RE , page 227 or at AIFX-
RE\M12, to section AIFX-RE\M12 , page 228.
Important! Operating the PC card CIFX 90E-RE\F (all variants
‘NHS’, ‘ET’, ‘MR’ or with ‘M12’) requires proper connection of the
Ethernet detached network interface (AIFX-RE) or the Ethernet
M12 detached network interface (AIFX-RE\M12) to the basic card!
Connector AIFX-RE or
AIFX-RE\M12 Cable Connector Ethernet X4
(JST BM20B-SRDS-G-TFC, Pitch 1,0 mm)
Ethernet Interface
Channel 0 and 1 With loaded EtherCAT Master firmware only the channel 0
can be used, channel 1 is deactivated. Beginning with the
EtherCAT Master firmware version 3 channel 1 can be
reactivated if redundancy is activated. For Open Modbus/TCP
with V2.3.4.0 and higher both channels can be used.
SYS System Status LED Display LED Display
For LEDs at AIFX-RE, refer to section AIFX-RE , page 227
or at AIFX-RE\M12, to section AIFX-RE\M12 , page 228.
Supply Voltage +3.3 V dc ±5 %, refer to section Power Supply and Host
Interface , page 61.
Important! For all PC cards cifX Mini PCI Express, the increase of
the supply voltage from 0V to 3.3V must last longer than 180 μ s.
Current consumption at 3.3 V 800 mA (maximum)
Power supply
Connector Via Mini PCI Express Bus
CIFX 90E-RE\F CIFX 90E-RE\NHS\F CIFX 90E-RE\ET\F
CIFX 90E-RE\MR\F - -
CIFX 90E-RE\F\M12 CIFX 90E-
RE\NHS\F\M12 -
CIFX 90E-
RE\MR\F\M12 - CIFX 90E-
RE\MR\ET\F\M12
Operating temperature range*
(
valid for AIFX-RE hardware
rev. 3 )
-20 °C ... +55 °C -20 °C ... +45 °C -20 °C ... +70 °C
*Air flow during measurment 0,5 m/s 0,0m/s 0,5 m/s
Storage temperature range -40 °C ... +85 °C
Humidity 10 … 95% relative humidity, no condensation permitted
Environmental
Conditions
Environment
For UL compliant usage: The device must be used in a
pollution degree 2 environment.
Device Dimensions (L x W x H) CIFX 90E-RE\F
1, 2
,
CIFX 90E-RE\MR\F
2
CIFX 90E-RE\F\M12
1, 2
,
CIFX 90E-RE\MR\F\M12
2
CIFX 90E-RE\NHS\F,
CIFX 90E-RE\ET\F,
CIFX 90E-RE\MR\ET\F,
CIFX 90E-RE\NHS\F\M12,
CIFX 90E-RE\ET\F\M12,