Heidolph Hei-VAP Expert, Руководство по эксплуатации

Страница: 73 / 200

Assembly
73
Vapor tube
Assembly parts
▪ Vapor tube
▪ Easy Clip flask clamp
▪ Coupling
▪ Clamping sleeve
The Easy Clip flask clamp is pre-mounted
in the NS29 size. The Easy Clip NS24 is
included for smaller flasks.
Clamping sleeve Easy Clip flask clamp
Vapor tube Vapor tube coupling
When the device is delivered, the coupling
for the vapor tube and the condenser are
pre-assembled.
➜ Press and hold the locking knob below
"lock" for a quarter turn.
➜ Unscrew the coupling of the vapor tube
together with the Easy Clip to the right
of the drive.
➜ Unscrew the coupling for the
condenser to the left of the drive.
Condenser
coupling
Vapor tube coupling
Easy Clip flask
clamp
Vapor tube locking
knob
Drive
➜ Remove the tension spring and the
PTFE seal on the condenser side.
Tension spring PTFE seal
Caution:
Contamination of your sample, device damage
A damaged seal can prevent reaching the desired vacuum, can
contaminate your sample or damage your device.
Never work with a damaged or worn PTFE seal. Inspect the PTFE seal
regularly and replace it if necessary.