Heidolph Hei-VAP Expert, Руководство по эксплуатации

Страница: 18 / 200

Start-up
18
The heating bath plug is located on the
rear right of the heating bath.
✓ The device is switched off.
✓ The heating bath is locked in place on
the base plate.
Heating bath connector socket
Heating bath plug
➜ Insert the 7-pin connector socket with
the recess pointing upward into the
heating bath plug.
➜ Tighten the union nut clockwise to the
right.
Recess Feather
Union nut Heating bath plug
Emptying the heating bath
Warning:
Risk of scalding! Risk of slipping!
When emptying the heating bath, you may burn yourself or slip on
spilled fluid.
Before emptying heating bath:
▪ Wear protective clothing.
▪ Switch the device off.
▪ Wait until the heating bath fluid has cooled below 50 °C.
▪ Disconnect device base and heating bath.
▪ Remove evaporating flask.
▪ Lift the heating bath only at the insulated handles.
✓ The device is switched off.
✓ The evaporating flask has been
removed.
➜ Turn the union nut on the heating bath
connecting cable to the left in counter-
clockwise direction until it is released.
➜ Disconnect the connector socket
contact from the heating bath.
➜ Put your thumbs on the ribbed
surfaces of the handles and then clasp
them completely.
➜ Carefully lift the heating bath at both
handles and empty it.
Heating bath handle
Protective lip