Heidolph Hei-VAP Expert, Руководство по эксплуатации

Страница: 70 / 200

Assembly
70
Transportation lock
(Motor lift only)
The transportation lock must be removed before start-up of the device. Retain the trans-
portation lock for a possible return.
The transportation lock consists of three M5x8 screws and a connecting plate with holes
for fixing the position.
Remove transportation lock prior to
start-up
✓ The base device is positioned on a
stable, level surface.
➜ Connect the heating bath
➜ Connect the control panel.
➜ Switch the device on.
➜ Use the provided Allen key to loosen
all 3 screws and remove the metal
sheet of the transportation lock.
➜ Move the flask lift to the highest
position.
➜ Switch the device off.
✓ You can now switch the device back on
and put it back into operation.
➜ Retain all parts of the transportation
lock for later use.
Transportation lock
To deactivate the additional electronic transportation lock, the device
must be switched off once when the lift is in the highest position.
Heating bath
Insert the heating bath
✓ A sliding base plate with a raised guide
rail is located on the right side of the
base device.
Base plate
Guide rail