GSK 980TDi, Руководство пользователя

Страница: 86 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
70
Ⅰ
Programming
Fig.3-32
3.8 Plane Selection G17
～
G19
Command format
：
G17……XY plane
G18……ZX plane
G19……YZ plane
Command function: use G commands to select the plane of the arc interpolation or the one of
the cutter compensation
Command explanation: G17, G18, G19 are modal, and the plane does not change in the block
without the command.
Notes:
1) Firstly set the basic axis Y when the system selects G17, G19 plane;
2) Cannot switch the planes in C tool compensation;
3) G71~G76
， G90 ， G92 ， G94 can be used in G18 plane;
4) The plane selection code can be in the same block with G codes in the other groups;
5) The movement command is not relevant to the plane selection;
6) Diameter or radius programming: currently, because there is only one bit parameter No
1.2 to select the diameter or the radius programming and is valid to only X axis, Z and Y
axis use the only radius programming in G2, G3, and X axis is selected by the
parameter;
7) The tool nose direction of C tool compensation is 0 in G17, G19.
8) Angel Q in the oval and parabola command, in G18 panel, it is an angle along Y axis in
G19, an angle along X axis in G17.
Program :
O0001(O0001)
G00 X120 Z100 T0101 M03 S800;
G00 X10 Z10;
G00 X0;
G01 Z0 F120 M08;
X30;
G7.3 X60 Z-40 P10000 Q0;
G01 X90 Z-60;
X110 Z-85;
X120;
M09;
G00 X120 Z100 M05 S0;
M30;
Z
X