GSK 980TDi, Руководство пользователя

Страница: 112 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
96
Ⅰ
Programming
G36 X200; traverse to X toolsetting point ( X toolsetting point coordinate: 200)
T0101; execute X tool compensation again
G00 X204; retract a little
G37 Z800; traverse to Z toolsetting point ( Z toolsetting point coordinate: 800)
T0101; execute Z tool compensation again and the toolsetting is completed
M30;
Note: Measure position arrival signal is enabled, the feed of CNC stop axis is immediately stopped
(regardless of the acceleration or deceleration treatment). Therefore, in order to guarantee the accuracy of the
stop position, the measure speed of the G36 or G37 should be set as low as possible; it is clamped at the
speed when the federate exceeds 200mm/min.
3.18 Workpiece Coordinate System G50
Command format: G50 X(U) Z(W) ;
Command function: define the absolute coordinates of current position and create the
workpiece coordinates system (called floating coordinates system) by
setting the absolute coordinates of current position in the system. After
G50 is executed, the system takes the current position as the program
zero (program reference point), and the system returns to the point after
executing the program zero return. After the workpiece coordinate system
is created, input the coordinate values with the coordinate system in the
absolute coordinates programming until the next workpiece coordinate
system is created again (using G50).
Command specifications:
G50 is non-modal;
X: New absolute coordinates of current position in X direction;
U: Different value between the new absolute coordinates of current position in X direction and
the absolute coordinates before executing commands;
Z: New absolute coordinates of current position in Z direction;
W: Different value between the new absolute coordinates of current position in X direction and
Programming zero
Z measured position
Offset value
(Before measure)
Offset value
(After measure)
X measured position
Tool No.