GSK 980TDi, Руководство пользователя

Страница: 104 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
88
Ⅰ
Programming
Command format Command path
6
G01 Q1_ D1_
G01 X3_ Z3_ Q2_ D2_
G01 X4_ Z4_
7
G01 Q1_ D1_
G01 X3_ Z3_ Q2_ L2_
G01 X4_ Z4_
8
G01 Q1_ L1_
G01 X3_ Z3_ Q2_ D2_
G01 X4_ Z4_
Command explanation: When the command format is treated as 1, X or Z direction coordinate
only can be specified one; otherwise, it is performed (Angle Q is ignored) based upon
the normal straight line. Wherein, Q_ is an angle between straight line and Z axis,its
range:-99999999~99999999
（
unit
：
0.001degree
），
its angle direction is shown below:
Q
(X ， Z)
Z
X
Fig. 3-46
Rear tool post coordinate system
Fig. 3-47
Front tool post coordinate system
Note
：
1) G00 and G01 commands are used for the drawing dimension direct input function; however,
G00 only performs the positioning when using drawing dimension direction input function of
the G00;