GSK 980TDi, Руководство пользователя

Страница: 408 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
392
Ⅲ
Connection
E ● ● ● ● ● ● ● ● ● ●
12-tool:
1 2 3 4 5 6 7 8 9 10 11 12
A ● ● ● ● ● ●
B ● ● ● ● ● ●
C ● ● ● ● ● ●
D ● ● ● ● ● ●
E ● ● ● ● ● ● ● ● ● ● ● ●
4.3 Tool change process description
Example: No. 1 tool is changed into No. 4 tool
Step 1: Sol A is turned on(tool pot is released)
Step 2: Ensure Sensor F is not inductive, Sol B is turned and the oil hydraulic motor rotates
Step 3: check the tool signal(Note: Sensor E is inductive for No. 1, 2, 3 tool, does not execute the
locking operation when the tool pot does not reach No. 4 tool). When No. 3 tool signal is confirmed,
Sensor E preparatory operation should be set to make the tool pot rotate to No.4 tool, at the time,
Sensor E is inductive, i.e. Sol B is turned on, the tool pot stops rotation and Sol A makes the tool pot
be locked.
2.9.3 Machine Zero Return
z Relative signal
DECX: X deceleration signal
；
DECY: Y deceleration signal
；
DECZ: Z deceleration signal ；
DEC4: 4th deceleration signal
；
DEC5: 5th deceleration signal ；
PCX: X zero signal
；
PCY: Y zero signal ；
PCZ: Z zero signal
；
PC4: 4th zero signal ；
PC5: 5th zero signal
；
Notice
When the feed axis matches with the absolute encoder, set the
arbitrary point as the machine reference point by the [n axis reference point
setting] on the page of the “Position
－
> Integral Coordinate”. It will directly
position to the reference point when zero return after the reference position
is set.
Mainly, the following relevant description is about the adaptive
incremental encoder and the zero return procedure of the rotation axis.