GSK 980TDi, Руководство пользователя

Страница: 560 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
544
IV Appendix
No. Content Remark
0143
The brackets are not matched in macro statement or the format is specified
in error
0144 The divisor in macro statement cannot be 0
0145 The specified anti-tangent ATAN format is mistaken in macro statement
0146 The anti logarithm of LN in macro statement is 0 or less than 0
0147 The square root in macro statement cannot be negative
0148 The tangent TAN result in macro statement is endless
0149
The operands of anti sine or anti cosine in macro statement exceed the
range between -1 and 1
0150
The macro variable number or the variable value is illegal(error) in macro
statement
0151 The local variable is empty
0152 The variable #0 is always empty and cannot be operated
0153 The operand in macro statement is not binary
0154
P value don't want to be defined while calling macro program of using G
code
0155 Format of program note is mistaken (mismatching)
0156
G20,G21 command code can not be executed with other command
simultaneously
0157 Metric/Inch system has been changed,and will be effective after restart
0174 Some parameters cann't be modified for current operation level
0175 W value or macro variety value of W is out of range while writing parameters
0176
W value or macro variety value of W is not a valid binary value while writing
parameters
0177
Not specify writing or reading operand under the state of writing or reading
parameters
0178
Not specify a parameter or the parameter don't exist under the state of
writing or reading parameters
0179 Not specify axis NO. when writing or reading axis parameters
0180 R only specify macro variety under the state of writing or reading parameters
0181 The axis NO. of setting is out of range while writing or reading parameters
0182
Specify simultaneously a operand of writing and reading in one program
segment under the state of writing or reading parameters
0183
Operand cann't be a decimal fraction under the state of writing or reading
parameter
0184
Specify two or above parameters in one program segment under the state of
writing or reading parameters
0185
Parameter NO. cann't be a decimal fraction under the state of writing or
reading parameters
0190 Not specify screw pitch or out of range in machinning screw or tap
0191 Head quantity of multi-thread is out of range
0192 Initial angle of screw (Q value) is out of range
0193 Nonzero move value of X axis has been commanded in G33
0194 Y axis can't interpolate with X/Z axis in G33
0195 R value of G34 is out of range