GSK 980TDi, Руководство пользователя

Страница: 264 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
GSK980TDi Turning CNC System User Manual
248
Ⅱ
Operation
4.2.3 MPG Feedrate
The upper limit of the MPG feedrate is the rapid traverse rate of each axis, which can be set by
data parameter No. 022.
When the state parameter No.013.6 = 0, and the MPG feedrate exceeds the rapid traverse rate,
the exceeded pulse is ignored; the MPG scale is inconsistent with movement amount
。
When the state parameter No.013.6 = 1, and the MPG feedrate exceeds the rapid traverse rate,
the exceeded pulse does not ignore; the MPG scale is consistent with movement amount, but the
axis may consecutively move when MPG stops.
4.2.4 Other Operations
1
）
Spindle CCW, CW, stop control
: In Manual mode, the spindle rotates counterclockwise if pressing this key;
: In Manual mode, the spindle stops if pressing this key;
: In Manual mode, the spindle rotates clockwise if pressing this key.
2
）
Spindle JOG
: at the moment, the spindle is in JOG working mode.
In spindle JOG mode, pressing can rotate counterclockwise for jogging; pressing
can rotate clockwise for jog. The jogging time and speed are set by DT12 and No.109 respectively.
Referred to Section 3.2.2.
3
）
Cooling control
Refer to OPERATION, Section 3.2.3
4 ） Lubricating control
Refer to OPERATION, Section 3.2.4
5
）
Chuck control
Refer to OPERATION, Section 3.2.5
6
）
Tailstock control
Refer to OPERATION, Section 3.2.6
7
）
Hydraulic control
Refer to II OPERATION, Section 3.2.7
8) Manual tool change
: In MPG/Step mode, press it to change tools orderly.
9) Spindle override tune
In MPG/Step mode, if the spindle speed is controlled by analog voltage output, the spindle speed
may be overrided.
Pressing ， can change the spindle speed in real-time to adjust 8 steps of 50 ％～ 120
％
of the spindle override