GSK 980TDi, Руководство пользователя

Страница: 497 / 570

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
Chapter 3 Parameters
481
Ⅲ
Connection
IS-B IS-C
Metric machine
0
～
1000 0
～
10000
Inch machine
0
～
50 0
～
500
3.2.19 Parameters Related to Addition
1 8 7 IS1 IS0 RCS *** *** *** ROS ROT
[Data type]: Bit axis
BIT7,BIT6: set incremental system of each axis
，
00: consistent with the incremental system of the
system ， 01: IS-A ， 10: IS-B ； 11: IS-C.
Bit5 1: Cs function of additional axis is valid/invalid (power-on again);
0: Cs function of additional axis is valid/invalid (power-on again).
Bit1,Bit0: 00 sets the additional axis to be the linear, 01 sets the additional axis to be the rotary(A
type)
，
11 sets the additional axis to be the rotary (B type)
，
10 sets the additional axis to
be invalid.
Note: This parameter is invalid to axes X and Z.
1 8 8 *** RRT *** *** *** RRL RAB ROA
[Data type]: Bit axis
Bit6 1: When the additional axis is rotary, the zero return uses D mode;
0: When the additional axis is rotary, the zero return uses A, B, C (power-on again).
Bit2 1: When the additional axis is rotary, cycle function of the relative coordinate is valid;
0: When the additional axis is rotary, cycle function of the relative coordinate is invalid
(power-on again).
Bit1 1: When the additional axis is rotary, its rotation direction is based on the sign direction;
0: When the additional axis is rotary, its rotation direction is contiguous.
Bit0 1: When the additional axis is rotary, cycle function of the absolute coordinate is valid;
0: When the additional axis is rotary, cycle function of the absolute coordinate is invalid
(power-on again).
Note: This parameter is invalid to axes X and Z.
2 2 5 NAME_n
［ Data type ］ Word axis
［
Data meaning
］
axis name definitions
［ Data range ］ 65, 66, 67, 88, 89, 90
Axis name Setting value Axis name Setting value Axis name Setting value
X 88 A 65 C 67
Z 90 B 66 Y 89
2 3 0 ATTRIB_n
［ Data type ］ Word axis
［
Data meaning
］
The properties of each axis in coordinate system
［ Data range ］ 0 ～ 7
Setting value Meaning
0 Neither the basic three axes nor the parallel axis